Drill Presses Store
Tools > Drill Presses > Item

Delta DP200 Shopmaster 10 inch Bench Top Drill Press Delta MORE INFO

Amazon.com This model has more capacity and more weight than its little brother--Delta's DP115 8-inch benchtop drill press--but you're still not talking about a lot of shop space or a lot of money. We like this drill press because it can drill to the center of a 10-inch-wide board with a 2-1/4-inch stroke, its table tilts left and right to 45 degrees with a positive stop at 0, and it offers five drill speeds depending on your material and bit size. You don't even have to know what speed is the right one--there's a chart inside the pulley cover that dictates belt speed according to hole size and material. Changing speeds is as simple as adjusting the belt on the pulley. Have some repetitive drilling to do? The adjustable-position locking depth stop takes the trouble out of the job. We like the Shopmaster drill presses for their Delta precision and tight prices, but we have to admit that the rack-and-pinion table height adjustment and the built-in gooseneck lamp on this model win our hearts. The three-jaw chuck will accept bits up to 1/2 inch, and when you're done drilling, just pop out the removable safety switch to prevent unauthorized use. --Kris Jensen-Van Heste From the Manufacturer If an 8-inch drill press is too small for your projects, but a 12-inch model is too expensive for your budget, try this 10-inch drill press. It has five speeds from 620 to 3,100 rpm and a heavy-duty 1/4 hp induction motor for smooth power and long lasting durability. The cast iron table tilts up to 45 degrees for angled drilling and has a rack and pinion raising mechanism for easy adjustments. Slots in the table allow mounting vises, clamps, auxiliary tables, and other accessories. The chuck... read more